parking lights, 06 Jeep Liberty

Home / the12volt's Install Bay / Car Security and Convenience / parking lights, 06 Jeep Liberty

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

belvedere

Member - Posts: 5

Joined: November 26, 2008

Location: South Dakota, United States

Posted: November 09, 2015 at 10:19 PM / IP Logged

I'm hoping some of you experts will help out an amateur. I'm installing an Avital 4113 in our '06 Jeep Liberty. Though I'm a DIYer, I do most of my own auto repair, and I'm a CBET, so I have a good understanding of electronics.

I need advice on the parking light hookup. The wiring guide that the seller sent to me says that the parking lights need a (-) polarity signal through a 910-ohm resistor, and it says "MUST use relay". I'm a little confused, because the vehicle already has a relay for the parking lights in the factory circuit. Can someone tell me exactly how to wire this? Thanks!

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: November 10, 2015 at 4:50 AM / IP Logged

Liberty Parking Lights

You can also find the parking light relay and tie into the Ground side of the control without using a resistor.

If i Can't Install it I Don't need it Joe

Back to Top

belvedere

Member - Posts: 5

Joined: November 26, 2008

Location: South Dakota, United States

Posted: November 10, 2015 at 6:12 AM / IP Logged

Just what I needed -- thank you!!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.