RS can't unlock/lock while engine is running

I've recently installed a viper 4806v in my 2010 honda pilot using Idatalink ADS-ACLA. Everything is working except for a strange issue. If the car is running the lock/unlock function of the RS will not effect it. I can hear the brain clicks like it should but the lock remain unaffected. However, if the car was running as the result of a pit stop (car running, remote start button on remote is pressed and key removed, car remain running), the lock/unlock function works like it was supposed to. Anybody experience this before?

try programming the remote start for double unlock pulse.

Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?

rs specialist wrote: try programming the remote start for double unlock pulse.

Thanks. This will probably work if the rs was lock/unlock wires were connected to the car instead of the ACLA. I tried it anyway without any luck.

beegbie wrote: Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?

It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that?

vincen wrote: beegbie wrote: Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca? It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that?

Yes, it's in the guide for a reason. It's what tells the alca to switch from sending factory keyless data to can data for door locks.

beegbie wrote: vincen wrote: beegbie wrote: Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca? It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that? Yes, it's in the guide for a reason. It's what tells the alca to switch from sending factory keyless data to can data for door locks.

Do you accept e-hugs? b/c you're about to get one right now! Turned out I did have that hooked up, but to a -starter output. Corrected it to what you suggested and it now works like a charm! thank you thank you!!! Now I can finally stop having to manual unlock it with a key!

Great job, happy to hear you got it working.