2006 Trailblazer w/viper 1000 and 457g bypass

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Trailblazer w/viper 1000 and 457g bypass

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hyperblu

Member - Posts: 7

Joined: March 18, 2008

Location: Tennessee, United States

Posted: December 16, 2015 at 7:57 PM / IP Logged

Trying to help a friend. Her car nearly left her stranded due to a dead battery, she had it tested and it came back fine, battery replaced, battery died again. She replaced the key fob battery and now it doesnt unlock the doors. She had the alarm and bypass fuses pulled and the power drain appears to have stopped. I tried to power it all up to find the problem, but the LED on the bypass is "stuck" in programming mode. The viper is chirping and accepting the key fob signal, but doors will not lock/unlock. The install is a mess, but connections are soldered. Unit worked for years problem free. I have tried to unhook the battery and try to relearn the 457g but the LED stays solid red and doesnt flash when cycling the ignition to ON. Im lost?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.