98 camry wiring

Home / the12volt's Install Bay / Car Security and Convenience / 98 camry wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kkpt

Member - Posts: 2

Joined: November 28, 2015

Location: Ontario, Canada

Posted: December 20, 2015 at 1:11 PM / IP Logged

Happy Sunday All,

I am KPT, new to this forum. Finding it interesting.

I am wiring a Xpresskit PKALL bypass module to my 98 XLE v6. I am doing this to wire my prostart remote starter using this bypass module.

the bypass module's diagram has few wires to connect to CLK, DATA and SYNCHRO wire from the ignition Barrel. the colour of wires as specified in the manual does not match to what is on the car.

Requesting any help that might guide to identify these wires

Thank you all, and Happy last minute shopping

KPT

kitchener, Ontario

kpt

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 20, 2015 at 3:31 PM / IP Logged

Here is the transponder connector wires from iDatalink :

AMP pin 1 BLACK / YELLOW (DATA) @ Ignition switch

Code pin 2 GREEN / WHITE (DATA) @ Ignition switch

RXCK pin 3 RED / Blue (DATA) @Ignition switch

TXCT pin 4 Blue / YELLOW (DATA) @ Ignition switch

Ground pin 5 WHITE/ Black (-) @ Ignition switch

Of course they give the wires different names, but...

Soldering is fun!

Back to Top

kkpt

Member - Posts: 2

Joined: November 28, 2015

Location: Ontario, Canada

Posted: December 20, 2015 at 7:59 PM / IP Logged

Thank you. Is there a way to identify by measuring volts or by tracing where it is?

Kpt

kpt

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.