2015 F150 Dash Cam

Home / the12volt's Install Bay / Car Security and Convenience / 2015 F150 Dash Cam

Welcome Guest :)

Members

< Prev Topic Next Topic >

tom6224

Member - Posts: 3

Joined: January 02, 2016

Location: New York, United States

Posted: January 02, 2016 at 8:44 AM / IP Logged

Happy New Year. First Post for me.

Looking to install a BlackVue Dash Cam in my 2015 Ford F150 STX.

Needs to be hard wired to fuse panel.

I need One fuse which is constant hot (Emergency Lamps/Cab Light)

And one fuse hot only when car is on (Cigar jack/Audio)

Any help would be appreciated.

chev104275

Gold - Posts: 1,428

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 02, 2016 at 11:06 AM / IP Logged

12volts

GREEN/ red (50A)

BCM in passenger kick, 22 pin plug (G), pin 22

Ignition WHITE/ orange + ignition switch, black 7 pin plug, pin 1

If i Can't Install it I Don't need it Joe

tom6224

Member - Posts: 3

Joined: January 02, 2016

Location: New York, United States

Posted: January 02, 2016 at 1:37 PM / IP Logged

I most certainly appreciate your quick reply.

The information you provided however might as well be written in a foreign language. Is it possible to clarify a bit?

Thank you, thank you, thank you.

Tom.

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 02, 2016 at 3:13 PM / IP Logged

He is telling you to the RED / Green wire at the he BCM(Body Control Module) is always "Hot". In passenger kick panel.

The WHITE/ orange is hot when vehicle is running. At ignition switch.

As always, test and verify with a DMM. (Digital MultiMeter)

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

tom6224

Member - Posts: 3

Joined: January 02, 2016

Location: New York, United States

Posted: January 03, 2016 at 8:20 AM / IP Logged

Thanks, you guys are great! The instant feedback is greatly appreciated.

Now don't be mad at the newbie, but I fat fingered my post. I have a 2014 F 150 not a 2015. Pleeeeeeease don't be mad, but I'm looking for contact hot in the kick panel, and accessory hot in the kick panel. Thank you again!

Tom.

chev104275

Gold - Posts: 1,428

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 03, 2016 at 8:59 AM / IP Logged

12 VOLT CONSTANT RED (+) and BLUE/RED (+) @ BCM, BLACK 32-PIN PLUG (D) Pins 6 and 1

ACCESSORY /HEATER BLOWER 1 PURPLE / GREEN (+) @ IGNITION SWITCH HARNESS, BLACK 7-PIN PLUG, PIN 6

As far as finding them in the kick that's going to require some hunting with a dmm

If i Can't Install it I Don't need it Joe

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 03, 2016 at 12:07 PM / IP Logged

Or get to ignition wires with a DMM.

Even easier, dome light go to power and constant ground, will probably shut down 10 minutes after doors locked.

Test any of the above with a DMM.

Do not assume.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.