Viper 5906v

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5906v

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

billybob2012

Member - Posts: 3

Joined: January 03, 2016

Posted: January 03, 2016 at 12:50 PM / IP Logged

I recently had the Viper 5906v installed in my Sierra and noticed that if the truck is running that the Viper remotes will not lock or unlock the truck only the factory remote will. Is there any way to change this or does the having the ignition on disable the remotes functions?

Back to Top

dairyboy3

Copper - Posts: 52

Joined: March 26, 2015

Location: California, United States

Posted: January 04, 2016 at 12:18 PM / IP Logged

What year is it? Was a module used? The Viper remotes should definitely be unlocking the truck while it was running. Are you getting confirmation chirps from the siren when you push lock or unlock from the viper remote?

Back to Top

billybob2012

Member - Posts: 3

Joined: January 03, 2016

Posted: January 04, 2016 at 4:41 PM / IP Logged

It's a 2004 and yes a module was used. I found that you can put it in pit stop mode by activating remote start while running and getting out and locking it. It will not lock or unlock while running without doing this and yes it does chirp when using the remote

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.