Viper alarm

Home / the12volt's Install Bay / Car Security and Convenience / Viper alarm

Welcome Guest :)

Members

< Prev Topic Next Topic >

voltamps

Member - Posts: 3

Joined: January 03, 2016

Location: California, United States

Posted: January 04, 2016 at 12:35 AM / IP Logged

I have a Viper car alarm, and would like to figure out how to program it so it doesn't beep when I lock or unlock the doors.

Not sure if this is the right place. ..

voltamps

Member - Posts: 3

Joined: January 03, 2016

Location: California, United States

Posted: January 04, 2016 at 12:40 AM / IP Logged

The remote shows 479v, not sure if that's the model of the alarm or just the remote.

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: January 04, 2016 at 7:55 AM / IP Logged

Go to Viper.com, support tab for owners guide for the Model 791xv. Pager 16 has info for programmable remote control features.

https://www.directeddealers.com/manuals/og/viper/G564V_07-05.pdf

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

voltamps

Member - Posts: 3

Joined: January 03, 2016

Location: California, United States

Posted: January 04, 2016 at 12:41 PM / IP Logged

smokeman1 wrote:

Go to Viper.com, support tab for owners guide for the Model 791xv. Pager 16 has info for programmable remote control features.

https://www.directeddealers.com/manuals/og/viper/G564V_07-05.pdf

Thank You!

davep.

Gold - Posts: 641

Joined: May 27, 2011

Location: California, United States

Posted: January 04, 2016 at 8:16 PM / IP Logged

This one I know from memory:

Open a door.

Turn ignition ON, then OFF.

Hold valet button until ONE beep. Release.

Push, release valet 2 times, then hold.

Should beep 2 times, LED should be flashing in groups of 2.

Push unlock on fob.

Should beep 2 times.

Release valet button.

Do nothing, and wait.

One long, one short beep. It's done.

Try it.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.