2015 Jeep Wrangler Standard Transmission

Home / the12volt's Install Bay / Car Security and Convenience / 2015 Jeep Wrangler Standard Transmission

Welcome Guest :)

Members

< Prev Topic Next Topic >

tribalhonda

Member - Posts: 1

Joined: December 19, 2009

Location: Arkansas, United States

Posted: January 09, 2016 at 12:17 PM / IP Logged

Ive successfully installed a code alarm remote start on this Jeep and everything works great. Except im getting a trouble code with engine light every time I remote start the thing. My guy at the Jeep dealership says the code is saying something about the Clutch Switch.

I have the remote start in "STANDARD MODE" So you have to go thru the steps when you get out of the Jeep.

Can someone tell me specifically how to hook up the negative pulse wire from the remote start to the clutch switch to trick the computer into thinking all is ok?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.