Proper way to test 200mA - output?

Home / the12volt's Install Bay / Car Security and Convenience / Proper way to test 200mA - output?

Welcome Guest :)

Members

< Prev Topic Next Topic >

cds333

Member - Posts: 4

Joined: February 16, 2016

Location: Maryland, United States

Posted: February 16, 2016 at 9:16 AM / IP Logged

Using a meter or oscilloscope, what would be the proper way to test the 200mA (-) output of a remote start for voltage and/or current?

Thanks!

cds333

Member - Posts: 4

Joined: February 16, 2016

Location: Maryland, United States

Posted: February 16, 2016 at 10:09 AM / IP Logged

Nevermind! It seems Avital remote starts will not process an unlock command if it thinks the doors are already locked. It will however flash the lights. Had to hook all 3 outputs up to the logic analyzer before I saw the pattern.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.