2015 camry dball2

Home / the12volt's Install Bay / Car Security and Convenience / 2015 camry dball2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

camryman76

Member - Posts: 2

Joined: February 20, 2016

Location: Alabama, United States

Posted: February 20, 2016 at 3:31 PM / IP Logged

I have installed the code alarm ca5153+dball2 into a 2015 camry H key. I am have a few issues. the door locks will not work with the ign key off. The dball is seeing the lock and unlock from the alarm because it has an led to show that signal. when I remote start with the code alarm it works great. and if the car is running the keyless starts working. when you cut off the remote start or the key the code alarm's lock and unlock doesn't work. It is acting like the BCS is in a sleep mode. It works great with the key on. I have went over all the wiring and everything is to the correct wires per TL10 wiring diagram. It has me scratching my head. any help will be greatly appreciated!!

Back to Top

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: February 20, 2016 at 7:49 PM / IP Logged

The db-all controls the door locks through the rda wire when the car is off and through the can wires when the ignition is on. How confident are you in your rda connection? Describe the pin location and wire color of your rda connection please.

Back to Top

camryman76

Member - Posts: 2

Joined: February 20, 2016

Location: Alabama, United States

Posted: February 20, 2016 at 8:32 PM / IP Logged

That make more since. I will have to check the connection tomorrow.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.