DBALL2 remote start

Home / the12volt's Install Bay / Car Security and Convenience / DBALL2 remote start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dan79

Member - Posts: 2

Joined: February 25, 2016

Location: Oregon, United States

Posted: February 25, 2016 at 11:34 AM / IP Logged

So I think I'm going to grab a DBALL2 cause they're cheap and will allow my stock key fob to start my car (2007 Dodge Charger SRT-8). Assuming everything goes fine during the install, I will then add a SmartStart system to it, which it is compatible with. This will allow my cell phone to track/start/unlock my car.

I'm only an amateur and I'm going through the install guide. It looks pretty straightforward for the most part. Connect wire to wire. The question I have is regarding the relay in the top left part of the instructions for the parking lights. Is this saying I need to install a relay or am I some how tapping into an existing relay? If I have to install a relay, where do I get that exact one? If I have to tap into an existing relay, how do I secure the connection?

DBALL2 remote start -- posted image.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 25, 2016 at 12:57 PM / IP Logged

Yes.

Standard automotive Bosch/Tycho 4 pin type available anywhere and everywhere, if they only have 5 pins in stock you just won't use 87a.

Back to Top

dan79

Member - Posts: 2

Joined: February 25, 2016

Location: Oregon, United States

Posted: February 26, 2016 at 10:37 AM / IP Logged

Thanks! So this Bosch relay should do it?

DBALL2 remote start -- posted image.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 26, 2016 at 12:37 PM / IP Logged

Yes. 87a isn't used.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.