Problem in installing central lock for alarm sys

Home / the12volt's Install Bay / Car Security and Convenience / Problem in installing central lock for alarm sys

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

nissansentra

Member - Posts: 5

Joined: February 26, 2016

Location: Mauritius

Posted: February 26, 2016 at 7:51 AM / IP Logged

Hi, I have purchase a alarm system for my Nissan b14, all is working properly except the central locking, I have install a new actuator 2 wire( green and blue, I have wired ORANGE / black from the alarm to the actuator green wire and connect ORANGE / white to blue wire from the actuator, but it is not working. How can I get the actuator work and I have attach the wiring diagram of the module

Please help me,

Thanks,

Problem in installing central lock for alarm sys -- posted image.

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: February 26, 2016 at 10:16 AM / IP Logged

Did you add door lock actuators to the vehicle?

The alarm has negative outputs.

nissansentra

Member - Posts: 5

Joined: February 26, 2016

Location: Mauritius

Posted: February 26, 2016 at 10:27 AM / IP Logged

yes I have buy a new one

Can you tell me how to connect it

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 26, 2016 at 1:20 PM / IP Logged

Look in the relay section, add actuators, it's the exact wiring you'll need.

nissansentra

Member - Posts: 5

Joined: February 26, 2016

Location: Mauritius

Posted: February 26, 2016 at 11:16 PM / IP Logged

That mean my alarm system is not compatible with the actuator?

Isn't a way to get it work?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 27, 2016 at 12:17 AM / IP Logged

Yes, add the relays.

Your system is compatible with most OEM central locking systems, adding an actuator requires a system with either built in relays or adding relays.

nissansentra

Member - Posts: 5

Joined: February 26, 2016

Location: Mauritius

Posted: February 27, 2016 at 1:08 AM / IP Logged

I have an relay that I have get it together with the alarm system for ignition , its 961A-1B-12DM 40A.

Can I used this relay?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 27, 2016 at 1:10 AM / IP Logged

You will need two of them.

nissansentra

Member - Posts: 5

Joined: February 26, 2016

Location: Mauritius

Posted: February 27, 2016 at 1:17 AM / IP Logged

Can you tell me what the 2 relay to buy and how to wired it please

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 27, 2016 at 1:19 AM / IP Logged

I gave you the answer already, check above.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.