DEI 520T Backup Battery

Home / the12volt's Install Bay / Car Security and Convenience / DEI 520T Backup Battery

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

drpitlikeitssco

Member - Posts: 4

Joined: February 02, 2016

Location: New York, United States

Posted: March 03, 2016 at 9:05 PM / IP Logged

I had a backup battery installed with my viper alarm. It does not function properly (it does not trigger the alarm when the battery is disconnected). I am really not too worried about it not triggering the alarm but what does concern me is I have read that the batteries die out really quickly and then in turn drain the vehicles battery. If the backup battery becomes problematic will I be able to just disconnect the battery from the 520t module to bypass it or do I have to remove the entire 520t module and all of the wiring.

Back to Top

Search for other posts by drpitlikeitssco

djbdub2004

Member - Posts: 7

Joined: February 25, 2016

Location: Ohio, United States

Posted: March 05, 2016 at 9:05 AM / IP Logged

Personally I'd disconnect the backup.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.