2016 Accord, Viper 5701, DB3

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Accord, Viper 5701, DB3

Welcome Guest :)

Members

< Prev Topic Next Topic >

jgeorgeunc

Member - Posts: 1

Joined: January 08, 2018

Posted: January 08, 2018 at 9:16 AM / IP Logged

I am hoping someone can answer this question for me.

Install on 2016 Accord with Key / Automatic

I installed a Viper 5701 with a DB3. I have all of the alarm functions working fine. I also have the remote start working. The issue is that the RS will start and run normal for about 2-4 Min and then it will shut off and then try to start again. But on the second try it will not fully start and just continue to crank the starter. Any idea's?

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: January 08, 2018 at 10:22 AM / IP Logged

Have you tried relearning the tach after the engine is warm?

My ex once told me I have a perfect face for radio.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.