Bulldog deluxe 500 short crank.

Home / the12volt's Install Bay / Car Security and Convenience / Bulldog deluxe 500 short crank.

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sin360

Member - Posts: 1

Joined: January 22, 2018

Posted: January 22, 2018 at 8:42 AM / IP Logged

I recently installed Bulldog Deluxe 500 remote start on my 06 F150 super crew. Someone gave it to so I figured Ill install it. Sometimes it short cranks and I have to hit it again then it will start with no issues. I have tried to adjust the crank time according to the manual to no avail. I think the crank time programming doesn't work because I have the tach wire installed. It's supposed have a 6 sec crank time with the tach wire according the site, but it only cranks for like 2 sec maybe the first time. I have the tach wire hooked up to coil # 5 since I didn't see a specific coil, I hooked it up there. Is it supposed to be on a specific cylinder like # 1? Also if I was to disconnect the tach wire will it just go tachless mode and I would be a able to program the crank time according to the manual.

Thanks

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.