2003 Duramax Base Model, Viper 5906v Wiring

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Duramax Base Model, Viper 5906v Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

duramaxedx2

Member - Posts: 4

Joined: July 20, 2018

Location: Florida, United States

Posted: July 20, 2018 at 3:47 PM / IP Logged

hey yall i got a 2003 duramax base model crewcab and im installing a viper 5906v and was wondering where to tie in the door input or green wire on the 24 pin connector for the viper 5906v its a base model no power locks yet and no power windows everything ive checked into mentions a 26 pin connector in the door but dont have one i think i have everything else wired up right but just trying to find the best place to tie the door input in and if its under the dash at the bcm or at each door thanks in advance for any info

thanks for all the help you guys LOL

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: July 20, 2018 at 5:21 PM / IP Logged

Look for at the BCM for a grey/black wire and a black/white wire:

https://www.the12volt.com/installbay/forum_posts.asp?tid=11497

My ex once told me I have a perfect face for radio.

Back to Top

duramaxedx2

Member - Posts: 4

Joined: July 20, 2018

Location: Florida, United States

Posted: July 20, 2018 at 6:02 PM / IP Logged

thanks brother ill look into it tomorrow morning appreciate the quick responce man

thanks for all the help you guys LOL

Back to Top

duramaxedx2

Member - Posts: 4

Joined: July 20, 2018

Location: Florida, United States

Posted: July 30, 2018 at 7:58 PM / IP Logged

figured it out in case anyone else runs across this problem the door switch input for a 2003 duramax base model crew cab is located at the bcm connector c4 pins a5 right front black/white b4 left front gray/black the rear is going to be another connector located on the back of the bcm towards the firewall the connector is c6 pins a2 right rear green/black a3 left rear blue/black

thanks for all the help you guys LOL

Back to Top

duramaxedx2

Member - Posts: 4

Joined: July 20, 2018

Location: Florida, United States

Posted: July 30, 2018 at 7:59 PM / IP Logged

thanks geepherder for kicking it off man

thanks for all the help you guys LOL

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.