How to Wire Keyless Entry to Existing Controller?

Home / the12volt's Install Bay / Car Security and Convenience / How to Wire Keyless Entry to Existing Controller?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stuee1

Member - Posts: 1

Joined: September 20, 2018

Location: Australia

Posted: September 20, 2018 at 7:09 AM / IP Logged

Hi, i have a holden jackaroo where the keyless entry has stopped working, i removed the old controller which feeds to another controller.

On the other controller it has to wires which are both negative signal 1 open, 1 close.

I purchased a LB-402 control box but for some reason cant seem to get it working together.

Would someone be able to look and give me advise how to wire up, i dont want to have to wire up 2 replays for it if possible.

this is the unit and cable out

Thanks

Stu

link

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.