2008 Honda Accord, PKALL Issues

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Honda Accord, PKALL Issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fmcmla

Member - Posts: 4

Joined: June 26, 2016

Location: Alberta, Canada

Posted: September 21, 2018 at 3:33 PM / IP Logged

Been doing lots of reading and trying to solve this for several days now without success. I'm installing an Avital 4113LX with PKALL bypass. Can remote start with key in ignition off position so most likely RS wiring is done correctly. Have tried repeatedly to program PKALL per instructions but have not attained 10 flashes that would confirm successful programming. All I get is a solid red at the end of programming and instructions say to start again from step 1. Also tried a second PKALL bypass unit new out of the box with the same results. Currently connecting D2D from PKALL to 4113LX and from PKALL's 6 pin connector: purple/white to vehicle ignition barrel data pin 6/light green, blue/white from PKALL's 6 pin connector to RS blue/white 2nd status, and pink from PKALL's 6 pin connector to vehicle ignition barrel pin 2/yellow.

Back to Top

fmcmla

Member - Posts: 4

Joined: June 26, 2016

Location: Alberta, Canada

Posted: September 21, 2018 at 7:54 PM / IP Logged

Decided to W2W by cutting D2D connector at RS end and hardwired red pin1 wire to 12V constant and black pin3 wire to ground and still no go. Continuity tested all wires and connections throughout the process. Any idea why I can't get the PKALL to program? So stumped.

Back to Top

fmcmla

Member - Posts: 4

Joined: June 26, 2016

Location: Alberta, Canada

Posted: September 22, 2018 at 1:18 AM / IP Logged

A bad T-tap connection at the transponder connector pin6/light green data wire was the culprit.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.