Car Alarm FOB, Replacement or Substitute?

Home / the12volt's Install Bay / Car Security and Convenience / Car Alarm FOB, Replacement or Substitute?

Welcome Guest :)

Members

< Prev Topic Next Topic >

shelbysnake

Member - Posts: 1

Joined: September 30, 2018

Location: Georgia, United States

Posted: September 30, 2018 at 10:57 AM / IP Logged

I have a car alarm 2 button FOB that has been broken and need to find a replacement or a replacement case. The FOB shell is shattered but the FOB works just fine when I use it by pressing the buttons on the circuit board.

The FOB is for a 2000 Bentley Arnage Red Label.

Here are the markings on the outside and the inside of the FOB. Label the outside of the FOB case is: "Anti Code Grabbing 315Mhz". Label on the circuit board "BB2678F" and "46-352. Printed directly on circuit board "27-371" THe FOB uses a A23 12 volt battery.

Any help would be much appreciated.

THak you, Arthur

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.