CM7200 Remote Start, 2013 Mazda CX-5

Home / the12volt's Install Bay / Car Security and Convenience / CM7200 Remote Start, 2013 Mazda CX-5

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spudwink

Member - Posts: 1

Joined: November 18, 2015

Location: Alaska, United States

Posted: October 03, 2018 at 6:49 PM / IP Logged

I have a CM7200 remote start module that I want to install in a 2013 Mazda CX-5, push-to-start, automatic.

1) Does any one know if this vehicle uses low current ignition wires.

2) If the Mazda CX-5 does use low current, can I use the high current harness instead without causing damage/problems, because I don't have a low current harness for my CM7200.

Back to Top

sand33p_sidhu

Member - Posts: 25

Joined: January 19, 2017

Location: Manitoba, Canada

Posted: October 10, 2018 at 12:40 AM / IP Logged

You DO NOT need low current wires. Use main harness to connect your 12V, Ignition, Starter, Accessory wire.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.