Remote Start Install, 2007 Jeep Wrangler

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start Install, 2007 Jeep Wrangler

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mastros101

Member - Posts: 1

Joined: December 04, 2018

Location: Alberta, Canada

Posted: December 04, 2018 at 11:00 AM / IP Logged

I have a Astrostart DS4 plus remote start system, with the T harness

Its going into a 2007 Jeep Wrangler.

Now I have the harness that goes into the immobilizer connected.

in the module I have the the 4 pin connected to the antenna,

H1 Main harness (12pin),H3 Data Harness (8pin) into the immobilizer.

I was wondering if I need to connect any of the connections from the 22pin analog input/output or the 10pin relay harness need to be connected ,

the vehicle already has an OEM remote for lock and unlock and the box does say its "OEM ready"

any help would be great thanks guys!!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.