5x10 Not Responding, Red LED Flashes Once

Home / the12volt's Install Bay / Car Security and Convenience / 5x10 Not Responding, Red LED Flashes Once

Welcome Guest :)

Members

< Prev Topic Next Topic >

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 26, 2019 at 5:10 PM / IP Logged

5x10 that has been installed a few years. noticed it was no longer responding to the fob or the valet button. pulled it apart and the LED on the top is just flashing red once at a time. I assumed it was just done so i bought a new one and it does the same thing. I can no longer get into my xkloader or expresskit.com.

2014 jeep wrangler

any help is appreciated, do i need to be a dealer to use the xkloader? its been a few years since i played with this stuff.

Search for other posts by paul.roberts.82

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: August 26, 2019 at 11:00 PM / IP Logged

Did you try swapping antennas or reuse the original?

Steve G

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 27, 2019 at 6:50 PM / IP Logged

reused the original,im not sure if the new one had one now that i think about it. im sure it does. the current one in the jeep is the long range antenna with the built in valet button.

thanks for the help

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 27, 2019 at 7:13 PM / IP Logged

also i will add, my gps unit has no lights with the old alarm or the new alarm. valet button does not work with either one. im baffled, there is really no electronics to go bad other than the actual alarm so i thought with the new one i could atleast see the valet button working.

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: August 27, 2019 at 7:51 PM / IP Logged

Have you checked the fuses to the alarm unit?

Steve G

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: August 28, 2019 at 11:32 AM / IP Logged

did you flash the new one for the vehicle? this is the manual, has the trouble codes at the end hope it helps

https://directechs.blob.core.windows.net/documents/dds-chrysler_fsg_en_nf20190411.pdf

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 30, 2019 at 7:04 PM / IP Logged

today i put the new 5x10 back in without connecting the GPS unit and it flashes red/green/orange over and over. still nothing on the valet.

it has not been programmed. guess i need to find someone local to help me out.

can anyone remote in and program it from my PC if i have a loader already?

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 30, 2019 at 7:05 PM / IP Logged

iskidoo wrote:

Have you checked the fuses to the alarm unit?

yes

paul.roberts.82

Member - Posts: 6

Joined: August 26, 2019

Location: Florida, United States

Posted: August 30, 2019 at 7:06 PM / IP Logged

mgoetz74 wrote:

did you flash the new one for the vehicle? this is the manual, has the trouble codes at the end hope it helps

https://directechs.blob.core.windows.net/documents/dds-chrysler_fsg_en_nf20190411.pdf

new one has not, i have a loader but lost my access to the web site.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.