2007 Toyota Tacoma, Viper 5706, Clutch Switch

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Toyota Tacoma, Viper 5706, Clutch Switch

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rbxxx

Member - Posts: 2

Joined: August 13, 2010

Location: Maryland, United States

Posted: December 10, 2019 at 2:29 PM / IP Logged

I am installing a Viper 5706 and I have seen a bunch of different ways/ideas to bypass the clutch switch for the remote start, most involve a relay and a diode by sending power to the 2nd Starter. Any reason why i couldn't add my own relay that goes around the original switch (circled). In other words:

Relay...

87 Blue/Black splice,

30 Black/Yellow splice

86 +12v

85 - Starter Status(Viper 5706 or similar NEG trigger)

2007 Toyota Tacoma, Viper 5706, Clutch Switch -- posted image.

thanks for the help

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 11, 2019 at 7:13 AM / IP Logged

Your relay setup will work.

My ex once told me I have a perfect face for radio.

Back to Top

rbxxx

Member - Posts: 2

Joined: August 13, 2010

Location: Maryland, United States

Posted: December 11, 2019 at 7:37 AM / IP Logged

Thank you for the response.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.