2011 Subaru Outback, Compustar CM900-AS, ADS Blade-AL

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Subaru Outback, Compustar CM900-AS, ADS Blade-AL

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ukie219

Member - Posts: 3

Joined: January 08, 2020

Location: Indiana, United States

Posted: January 08, 2020 at 11:02 AM / IP Logged

The doors do not lock or unlock with the new fob. I have not landed individual wires for the door locks (from CN3) because I assumed that the Blade would be communicating through the Can bus. Just looking to know for sure that I still have to land those additional wires. Thank you.

Back to Top

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: January 08, 2020 at 11:26 AM / IP Logged

https://images.idatalink.com/corporate/Content/Manuals/DL-SUB3/COM-BLADE-AL(DL)-SUB3-EN_20190726.pdf

you have to use a relay and wire the door lock special on Subaru.

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Back to Top

ukie219

Member - Posts: 3

Joined: January 08, 2020

Location: Indiana, United States

Posted: January 08, 2020 at 6:12 PM / IP Logged

Thank you for your reply, unfortunately I followed that diagram and this is why I'm here. I'm not 100% clear whether the blade is using the can bus for the door locks or do I have to land the actual wires from Cn3.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 09, 2020 at 7:41 AM / IP Logged

There is no need to connect the R/S CN3 wires to the Outbacks Lock / Unlock wires. The Blade-AL will handle the locks and Factory Alarm for you via it's connections to the car. You will need the relay shown in the Type 3 Install diagram in place and wired correctly to the Keyless wire.

Soldering is fun!

Back to Top

ukie219

Member - Posts: 3

Joined: January 08, 2020

Location: Indiana, United States

Posted: January 09, 2020 at 11:44 AM / IP Logged

Thank you for spelling it out for me. Apparently I used a bad relay initially. After changing it everything works correctly. Again, thank you kindly.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.