Directed 1701G Interface Programming

Home / the12volt's Install Bay / Car Security and Convenience / Directed 1701G Interface Programming

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

learnin

Member - Posts: 3

Joined: June 12, 2020

Posted: July 06, 2020 at 2:48 PM / IP Logged

I realize this has been out of production for a while.

The provided instructions, for entering the feature programming mode, do not work. The 1701G unit powers up, and successfully learns the vehicle (the LED then goes ON solid). But it will not enter programming mode by the method specified in the manual (ignition ON, then OFF, and hitting the programming button within 5 seconds).

I'm sure that someone knows how to get this to work. Instructions attached. I purchased this older unit, because it does not need firmware updating that I do not have access to. Any help you can give me on this will be greatly appreciated!

Directed 1701G Interface Programming -- posted image.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.