the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bcm& kickpanel


Post ReplyPost New Topic
< Prev Topic Next Topic >
high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 10, 2003 at 8:48 AM / IP Logged  

Can anyone tell me what the BCM in a 2001 buick century looks like Because i cant locate the kick panel. Was told that the kick panel  was down by the parking brake(left of drivers foot) but there is no panel there just the mechnasim for the parking brake . Thanks for the help   high-d                                                                                                                                        

high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 10, 2003 at 9:43 AM / IP Logged  
I found the BCM . My question now is can i unplug the connector from the BCM  that has the 2 wires i am looking for RED / black and ORANGE / black  without messing up the BCM  in anyway.Thanks   high-d
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 10, 2003 at 10:10 AM / IP Logged  
Yes you can.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 10, 2003 at 11:17 AM / IP Logged  
Thanks again Jeff for all your help . high-d
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 10, 2003 at 12:55 PM / IP Logged  
No problemo
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 10, 2003 at 5:33 PM / IP Logged  
One more question Jeff ,on my commando ke 30 on the wiring harnes do i have to wire up all the wires ,white for park lights,red for +12 to consntant battery ,black wire ground (which i did wire up.) The others are orange for groundedoutput when armed,gray for channel 2 output ,green for channel 3 output,violet dome light output.yellow fro igntion switched+12. Idont care bout any of those things Can i just wire up the white ,red and the black  for just the keyless entry to work dont care bout the horn or any of that just the keyless entry .  thanks    high-d
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: June 11, 2003 at 6:30 PM / IP Logged  
You should also hook up the ignition wire too. The others aren't needed.
high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 11, 2003 at 6:35 PM / IP Logged  
Thanks for the info JWorm  Can  I get the constant +12 volts from any where or does it have to be from the ignition.If it has to come from the ignition why.  Thanks again for the info   high-d
high-d 
Member - Posts: 18
Member spacespace
Joined: June 05, 2003
Location: United States
Posted: June 11, 2003 at 9:51 PM / IP Logged  
Also do i need to hookup the yellow wire to the ignition for the keyless system to work
caveman 
Member - Posts: 27
Member spacespace
Joined: June 11, 2003
Location: United States
Posted: June 11, 2003 at 10:20 PM / IP Logged  

 I'll just put in my two cents here.... If its only a keyless entry, then you dont necessarily need the ignition wire. It's usually only there to automatically lock the doors when you start the car. If its an alarm system, you need the ign wire so the system wont activate while the vehicle is running.

Steve

"Installing it yourself keeps my repair man busy"
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer