LED Flasher for Viper 550

Home / the12volt's Install Bay / Car Security and Convenience / LED Flasher for Viper 550 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Carbonman

Member - Posts: 4

Joined: June 04, 2003

Location: Canada

Posted: June 12, 2003 at 10:23 PM / IP Logged

Hey

I got a new/used/never installed viper 550 ASP alarm system, but when I open the box no LED flasher to be found.

Do I have to go to DEI for the replacement or can these be had from any alarm shop or make my own?? OR do I even need to install it?

thanks

Back to Top

caveman

Member - Posts: 27

Joined: June 11, 2003

Location: United States

Posted: June 12, 2003 at 11:17 PM / IP Logged

Any LED will work fine....as long as its a 2volt LED....which most are. You only need the connector that original LED had to plug into the alarm brain. All DEI dealers will have one around I'm sure. The plug is so small I dont recommend trying to solder the wires on the brain itself.

Steve

"Installing it yourself keeps my repair man busy"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED Flasher for Viper 550

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.