remote start on a standard

Home / the12volt's Install Bay / Car Security and Convenience / remote start on a standard (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bdog

Member - Posts: 5

Joined: July 26, 2003

Posted: July 26, 2003 at 8:10 PM / IP Logged

I know most people would not do this on an install for someone else because of liability issues but I have it wired up on my truck. I still have the clutch safety switch wired in so it will not start without pressing the clutch but I have tested the remote start holding the clutch in and it works. My question is what if any safety measures could be installed to go along with this setup? I am pretty sure I can rember to leave it in neutral and engage the emergeny brake but I am worried about what if. I can just imagine hitting my remote start one morning and then walking outside and seeing my truck in the neighbors living room.

bdog

Member - Posts: 5

Joined: July 26, 2003

Posted: July 26, 2003 at 9:58 PM / IP Logged

Nevermind. I tried searching and found a wealth of information. Should have thought of that before I posted.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start on a standard

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.