Hornet 554T Install without Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / Hornet 554T Install without Remote Start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 07, 2003 at 11:09 PM / IP Logged

Hey guys, I'm really just wondering what you guys think of this alarm. It goes for a good price on eBay and I'm thinking about getting it, since virtually no other DEI brand alarm sells online (that I can find).

Also, my car is a 5spd (93 Prelude), and I DO NOT want to mess with remote start. What exactly would have to be done to have the full functioning alarm but not the remote start?

Tony

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: August 08, 2003 at 8:44 AM / IP Logged

I'm pretty sure you can just not hook up the remote start wires. There's a few harnesses for the remote start that plug into the module, so I'm sure you can just leave those out.

Q: What's the best nation in the world?

A: Donation! Donate to the12volt.com

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 08, 2003 at 11:50 AM / IP Logged

Hey Velocity Motors, you seem to be the person to ask questions around here. Can you verify this?

clubsi

Member - Posts: 4

Joined: August 08, 2003

Location: United States

Posted: August 08, 2003 at 2:45 PM / IP Logged

Mugen1516 wrote:

Hey Velocity Motors, you seem to be the person to ask questions around here. Can you verify this?

Yes, you can install that alarm without the remote start. Pretty much don't install the satellite relays and you'll be fine. I don't think it's worth getting the 554t if you don't use remote start feature.

-Jimmy

vaderfop

Copper - Posts: 95

Joined: April 18, 2003

Location: United States

Posted: August 08, 2003 at 3:21 PM / IP Logged

make sure you hook up the ignition wire from the relay pack, otherwise your alarm will NOT reset itself after it has been triggered.

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 08, 2003 at 4:11 PM / IP Logged

Well, I like all the other features including the 2-way pager. If there was a way that I could make the alarm make sure it is not in gear, before it tried to start then I would hook it up.

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 08, 2003 at 4:21 PM / IP Logged

So, I leave out the "Relay Satellite Key Inteface" part and I leave out the Remote Start Harness correct?

Mugen1516

Member - Posts: 21

Joined: August 07, 2003

Location: United States

Posted: August 08, 2003 at 9:09 PM / IP Logged

Anyone care to give me a more detailed answer? As in, exactly which wires do I NOT connect and which ones do I STILL connect, to not use remote start but to keep starter kill and all the other features.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 08, 2003 at 9:20 PM / IP Logged

The only wire you need to hook up is the ign wire on the relay harness (should be pink, the alarm senses that the ign is on through this wire). You don't need to hook up any other wires that deal with the remote start.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Mr.Tech

Member - Posts: 21

Joined: December 31, 2002

Location: Canada

Posted: August 08, 2003 at 9:21 PM / IP Logged

Well if i do install..I will not connect starter ,Ign2 ,Acc wire and brake wire..I will even install really pack instead putting in my trash can..because from relay pack also power goes to brain and ign.Connect ign wire and pwer from relay..trsut me..you have so much space under your dash Hornet 554T Install without Remote Start -- posted image.

Hornet 554T Install without Remote Start -- posted image.

if you need more info let me know

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.