ford areostar door locks

Home / the12volt's Install Bay / Car Security and Convenience / ford areostar door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rrdb

Member - Posts: 5

Joined: August 13, 2003

Location: United States

Posted: August 13, 2003 at 5:13 PM / IP Logged

I recently installed the vampire keyless entry in the Areostar. I only can get the driver door, and the sliding door to lock and unlock, with the keyless entry. The relay is in parallel with the driver door buttons, it is also getting the main power from that circuit. Any suggestions? Fixes to resolve this. All

john l

rrdb

Member - Posts: 5

Joined: August 13, 2003

Location: United States

Posted: August 13, 2003 at 5:20 PM / IP Logged

I wanted to add to this, the door locks work with the buttons. Only the remote opens only two doors. (driver and sliding door)

john l

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 14, 2003 at 4:23 PM / IP Logged

what year is the van????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

rrdb

Member - Posts: 5

Joined: August 13, 2003

Location: United States

Posted: August 14, 2003 at 7:51 PM / IP Logged

1993 Ford AREOSTAR XLT

john l

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 15, 2003 at 12:36 AM / IP Logged

are these the wires that you used????

Power Lock PINK / YELLOW DRIVER KICK PANEL OR #202

Power Unlock PINK/LIGHT GREEN LOWER PASSENGER "B" POST

#202- See Positive Pulse Door Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

rrdb

Member - Posts: 5

Joined: August 13, 2003

Location: United States

Posted: August 15, 2003 at 9:40 AM / IP Logged

Those are the wire that I used.

john l

rrdb

Member - Posts: 5

Joined: August 13, 2003

Location: United States

Posted: August 15, 2003 at 9:41 AM / IP Logged

I used the ones on the Drivers side

john l

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 15, 2003 at 6:13 PM / IP Logged

Make: Ford

Model: Aerostar

Year: 1992-95

This Database Was Last Updated On: 6/9/03

Index #: 8571

Alarm

Constant 12 volts YELLOW (5) IGNITION SWITCH HARN. (ALL 1 CIRCUIT)

Ignition 12 volts RED / LIGHT GREEN IGNITION SWITCH HARNESS

Starter WHITE/ PINK IGNITION SWITCH HARNESS

Dome Light BLACK/ LIGHT BLUE (+) DRIVER KICK PANEL

Trunk Pin Switch BLACK / YELLOW (-) REAR PIN SWITCH OR AT RELAY

Parking Lamp BROWN (+) HEADLIGHT SWITCH OR DR.KICK PANEL

Power Lock PINK / YELLOW DRIVER KICK PANEL OR #202

Power Unlock PINK/LIGHT GREEN LOWER PASSENGER "B" POST

#202- See Positive Pulse Door Lock Diagram.

john move the wires like we talked about. use the info above for the new colors and locations. let me know what you find out............

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

eurotek

Copper - Posts: 58

Joined: July 31, 2003

Location: United States

Posted: August 16, 2003 at 9:01 PM / IP Logged

i have a 93 aerostar, installed an alarm.. not positive pulse door lock system.

i did a reversal rest at nothing,... or "C" for Omega fans... DEI tech says positive, wasn't so

wires found in driver's kick

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ford areostar door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.