Tach vs. Voltage check poll

Home / the12volt's Install Bay / Car Security and Convenience / Tach vs. Voltage check poll (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

StealthEs

Copper - Posts: 326

Joined: September 04, 2003

Location: New Jersey, United States

Posted: September 11, 2003 at 10:31 AM / IP Logged

Just curious if any of you guys favore one over the other. I am a fan of both . For the most part, I do Voltage check rather then Tach. Every now and then I switch to tech. I know most say do tech. Less risk of car coming back with starter problem. I have yet to have a car come back for this reason that wasnt cause by someone messing with the alarm . Only times they've come back for that reason was when dealer unpluggs brain. Or when i had a customer do an engine swap at the dealer. That car was hooked up with the tach. Still came back because the brain needed to relearn the tach.

What about you guys?

Cris

Back to Top

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: September 11, 2003 at 1:03 PM / IP Logged

Autopage750LCD - Silverado '01 - Voltage

Unit failed to notice engine didn't start several times. Never re-cranks running engine

Excalibur Gold - Blazer '99 - Voltage

Unit starts no prob, attempted restart several times when engine failed to start (dead fuel pump). Only 1 time has it thought it started but didn't

Crimestopper - Geo '92 - voltage no tach

No difference either way in starting/crank time. Haven't tried disabling engine to test if it know are not.

Back to Top

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 11, 2003 at 10:04 PM / IP Logged

The only r\s that I actually like using tachless is the Omega RS4LX(this is by far the best tachless unit on the market). Otherwise I notice most other brands(including CODE and DEI) do not register the voltage drop and keep shutting off(especially with GM vehicles).

Back to Top

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: September 12, 2003 at 4:43 PM / IP Logged

I always use the Tach signal except when using the Autopage 750 which works better in voltage sensing mode believe it or not. I have never seen it before, but the car actually shut off a couple of times in tach mode, and then tried to restart like it thought the car shut off. Wierd!

J Rilla

Owner/Installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach vs. Voltage check poll

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.