keyless problems

Home / the12volt's Install Bay / Car Security and Convenience / keyless problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mackytacky

Member - Posts: 2

Joined: September 18, 2003

Posted: September 27, 2003 at 1:57 PM / IP Logged

hi, I bought a bulldog RS1100 for my 97 Civic Sedan LX without keyless entry. I was trying to install the optional keyless entry and did what the manual said and wired everything right. But when I test it out, the doors won't unlock/lock and the module will just start clicking every time I press the lock/unlock on the remote? Any ideas?

Back to Top

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: September 27, 2003 at 8:54 PM / IP Logged

the honda civic takes a neg. pulse to unlock and lock the doors. Does the rs1100 put out a neg pulse or pos. pulse output for the door lock wires? The wires on the civic should be GREEN / WHITE, GREEN/ org found in a blue plug in drivers kick panel

Cruisin Security And Sounds

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 27, 2003 at 10:23 PM / IP Logged

Check to see if the target wires actually activates the door lock system. If the door lock module isn't working, the door locks will not operate at all. The target wires rest at 12 volts and go to ground when activated.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

mackytacky

Member - Posts: 2

Joined: September 18, 2003

Posted: September 30, 2003 at 9:10 PM / IP Logged

thanks for the responses, i got it working, and it works great. Thank you for all the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

keyless problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.