Matrix RS2 on '01 Impala issues

Home / the12volt's Install Bay / Car Security and Convenience / Matrix RS2 on '01 Impala issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Lord_Kaos

Member - Posts: 6

Joined: February 11, 2003

Location: United States

Posted: November 08, 2003 at 4:56 PM / IP Logged

Only issues that I would like to resolve are that the installer (a friend) didn't hook up the lights to flash on arm/disarm and intermittantly upon remote starting the car the SES light comes on.

What would it take to wire up the parking lights to flash?

Is there something special that should have been done to prevent the remote start from throwing the SES intermittantly.

Thanks for any info

Shawn

Back to Top

ricetech

Copper - Posts: 64

Joined: December 10, 2002

Location: United States

Posted: November 08, 2003 at 5:55 PM / IP Logged

the parking lights are easy, just look up the alarm info in the vehicle info section of this site. then take the parking light wire from the alarm- its usually the white one- and splice into the parking light wire. its that easy. as for the ses light i have no clue.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 08, 2003 at 6:00 PM / IP Logged

The parking lights you require a relay and the use of the (-) parking light trigger wire ( WHITE at the BCM ). Wire the relay like this:

85 : (-) parking light output from RS
86: Constant 12 volt fused with a 20 amp fuse
87 : GROUND
30 : to WHITE wire (-) Switch Side
87a: To White wire BCM side

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Lord_Kaos

Member - Posts: 6

Joined: February 11, 2003

Location: United States

Posted: November 08, 2003 at 6:11 PM / IP Logged

Thanks, that was exctly what i was looking for. I assume from reading around that that will probably take care of the SES problem too.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 08, 2003 at 6:35 PM / IP Logged

Yes, that will saolve the warning light problem as well

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Lord_Kaos

Member - Posts: 6

Joined: February 11, 2003

Location: United States

Posted: November 14, 2003 at 6:18 PM / IP Logged

Can someone clue me in as to where the BCM is located in this car? I think i've found it, but i'm not sure. Everything else will be simple once i get that accomplished. Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix RS2 on '01 Impala issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.