Door Lock Problems

Home / the12volt's Install Bay / Car Security and Convenience / Door Lock Problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

watchdog

Member - Posts: 4

Joined: November 09, 2003

Posted: November 12, 2003 at 2:39 PM / IP Logged

Hi,

I rescently installed a Prostart 3300 on my Ford Escape XLT 2001. When I press the lock or unlock button on either the Prostart remote or the factory Ford Remote, all doors will lock and unlock except the Drivers side door.

Any suggestions.

Thanks

Back to Top

vaderfop

Copper - Posts: 95

Joined: April 18, 2003

Location: United States

Posted: November 12, 2003 at 3:02 PM / IP Logged

Are you sure there is not something wrong inside your driver's door? You might want to check that out just to be sure. Does the inside lock work? Power lock?

Here is the wire info (just to double check):Should be both lock and unlock wires going to the same wire (pink/white at DKP or 26 pin plug @ GEM). Lock requires a 1000 Ohm resistor with a (-) negitive pulse and unlock just requires a (-)negitive pulse.

Remember check all your wires with a DMM!

Back to Top

watchdog

Member - Posts: 4

Joined: November 09, 2003

Posted: November 12, 2003 at 3:19 PM / IP Logged

No, the inside door lock does not work either ( Drivers Door )

I did not use any relays for this hook up. Followed information on this website, and used Yellow/Red for unlock, and ORANGE / Black for lock.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door Lock Problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.