GM Passlock, 03 malibu, pro-start 3300

Home / the12volt's Install Bay / Car Security and Convenience / GM Passlock, 03 malibu, pro-start 3300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nyislanders

Member - Posts: 3

Joined: November 15, 2003

Posted: November 15, 2003 at 6:36 PM / IP Logged

I have a 03 malibu that is getting a pro-start 3300 installed. The problem is that (according to them) that the by pass that I gave them for the passlock screwed up the car and put it into theft mode. Now the car will not start! They said that the pcm may have to be re-programmed to get the car out of theft mode. Any advice that any of you guys can give me that I can pass along to get the car out of theft mode. Because if they have to get this pcm re-programed then it may be a few days until I get my ride back. Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 15, 2003 at 6:37 PM / IP Logged

What Passlock bypass module did you use and can you remember the wires that you hooked up to it ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

nyislanders

Member - Posts: 3

Joined: November 15, 2003

Posted: November 15, 2003 at 6:40 PM / IP Logged

It was the bypass that commandocaralarms.com was selling (I can look it up), as for the wires, I am not the one hooking it up, I am just trying to help these guys out.

nyislanders

Member - Posts: 3

Joined: November 15, 2003

Posted: November 15, 2003 at 6:53 PM / IP Logged

the part #is (pass-mod) from commando car alarms. Any guidance will be greatly appreciated

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: November 15, 2003 at 11:49 PM / IP Logged

Well its not the bypass's failt, they were the ones who screwed it up, they should fix it, or pay for it. This is why I dont think it is a good idea to buy something and have someone else install it.

J Rilla

Owner/Installer

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 16, 2003 at 7:50 AM / IP Logged

Well expressed J Rilla. I agree, but the problem is still there. Until the dealership can scan the car and see what's going on with it, it will be a waiting game.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: November 16, 2003 at 12:22 PM / IP Logged

did you try leaveing key on for at least 10 min you may have to do this for one hour if that doesn't work there is a procedure to reset pass 2 i can't remember it but maybe somebody else does

kirk

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

GM Passlock, 03 malibu, pro-start 3300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.