1996 Chevy Astro Van and Viper 555 alarm

Hello,

     I have a 96 Astro minivan and I wanted to install a viper 555 alarm on it with remote start. I have connected the alarm without connecting the wire to the tachometer at this time. When I engage the remoter start, I hear the engine cranking but it will not turn over, however if I have the key in the run position it turns over. According to the install manual( they claim I have an acessorie wire and ignition wire reversed. I tested each wire with my meter and it does which each should do. According to your wire diagram, the ignition wire is pink. What should I do? Thanks for any help.

hi if i remeber correctly your pink wire should go to pink on vehicle your orange to orange pink white to white or pink and white on vehicle. and your tach wire is white at the coil.good luck

kirk

These are your wires:

12V|red                 |+  |ignition harness           

Hook them up and hook up your TACH wire and learn it to the RS unit. This will ensure a proper start. 

Hello,

       I want to tell everyone thanks for the support and quick responses. I will complete the project tommorrow and I will let everyone know how I made out.

hi you can also find tach at ecm on pass side under dash i beleive it is purple with white trace or white just meter it to make sure. make sure and hook up your hood pin for safety

kirk