99 Explorer door locks

Home / the12volt's Install Bay / Car Security and Convenience / 99 Explorer door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gpowen

Member - Posts: 1

Joined: November 23, 2003

Location: United States

Posted: November 28, 2003 at 3:44 PM / IP Logged

Do I need any relay's or diodes to get my doors to work? My remote start has (+/-)output for the doors.

Also what color are the wires are the + and - inputs?

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: November 28, 2003 at 11:18 PM / IP Logged

pink / YELLOW is your lock wire and pink/green is unlock these wires are negative trigger door locks.

You are going to use the outputs of the alarm for negative locks and no relays should be required.

The door lock wires mentioned above are in the driver kick panel and are small guge wires they may also be at the factory keyless entry unit. good luck

Back to Top

Search for other posts by mobiletoys2002

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 Explorer door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.