Autostart 2510 software updates

Home / the12volt's Install Bay / Car Security and Convenience / Autostart 2510 software updates (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

matthewc

Member - Posts: 2

Joined: December 13, 2003

Posted: December 15, 2003 at 8:48 PM / IP Logged

Hi,

Has anyone here heard of software updates for the Autostart 2510's. I am having major problems with my unit and Autostart advised me to use there software update to get the newest verion of 3.5 and that *may* solve my problems!!Apparently they send you a new chip and you pop open your module and stick it in.Anyone heard if this solves a lot of problems with the Autostart units??

Thanks,

Matt

derek123

Copper - Posts: 163

Joined: October 09, 2003

Location: Canada

Posted: December 16, 2003 at 10:02 AM / IP Logged

Software 3.5 improves the remote's conformation.

matthewc

Member - Posts: 2

Joined: December 13, 2003

Posted: December 16, 2003 at 11:56 AM / IP Logged

Thanks! Is there any way of looking up what revision 3.4 was for, 3.3, ect...Such as 3.5 adds: Better confirmation.3.4 adds: yadda yadda.Were would I find more information about autostart software updates, there web page gives little to no info.

Thanks again,

Matt

titi0511

Member - Posts: 6

Joined: November 22, 2003

Location: Canada

Posted: January 14, 2004 at 9:49 PM / IP Logged

Check the label on the back of he unit.

After the date is the hardware and sofware #. The software # starts with S or F. TW system with software F3.5 works much better.

We had some problems with Autostart's products before but their hardware H3.4 and software F3.5 works perfect now. Problems as the unit couldn't read tach, no start ... were fixed. I'm happy now. My store go back with their products.

Autostart 2510 software updates -- posted image.

Newbee

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Autostart 2510 software updates

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.