2002 Mustang GT Alarm/Remote Start

I have a transponder box for the ford pats key, the one where you have to put a key to the car in it and put the ring around the ignition. My question is, the ring got broken off when i removed it out of my last car, would this unit still work? for example if i wrapped a piece of wire around the igniion and connected it to the leads from where the ring was, would that still work? my other option is i have a DEI 555C i was going to use if the first one wouldn't work. Any suggestions would be greatly appreciated.

Thanks,

James

hi throw out the transponder box and take the key wrap 22 guage wire around head 6 times tape wire in place take one end of wire to pin 87 of relay go up to ignition collumn wrap 6 times around ignition go back down to pin  30  pin 85 to power supply pin 86 to out when running from rs or bypass trigger whatever they call it.  secure wires in place at igniton and relay

Thanks for all the help on my post about the pats interface, but i have one more question, when i had my lx mustang it had a single coil, now that i have the gt, it has 8 coils. My question is, where should i tap into for the tach on a remote starter?

Thanks,