jdl-pk not working

Hi,

I was dioing install using clifford rs3.5 and jdl-pk for my jeep. Everythig seems to be working except the jdl-pk box. When I connected it for the first time it would set off factory allarm uppon arming. After i have disconnected the battery and checked the wires,which were in order, the jdl-pk stopped responding to the dorlock triggers.The bypass works and lets me do remote start but it does not lock or unlock the car anymore. I have applied direct dround to the wires and nothing happens. Any ideas?

Thank you for your help,

Peter

I have hooked up the wire last and it would lock the dor and roll the windows up, except that it was setting the factory allarm off right after arming. I have disconnected the battery, checked the wires and when I connected the battery it stopped locking unlocking and rolling the windows up. At that point everything was wired in so I guess the data line was not the last one at this point. When I reconnect the battery it sets the factory allarm off so I know that it does talko to the data bus at that point. After that nothing happens. The jeep is 2001 grand cherokee.

Any ideas? Thanks for your help.

no i did not use the light. i connected: remote start input, lock, unlock, second unlock, horn input from the siren, ground power and the data bus.

 Sorry for the previous post. my formatting got screved up.

no i did not use the light. i connected: remote start input, lock, unlock,

second unlock, horn input from the siren, ground power and the data bus.