2003 ram prostart install

Home / the12volt's Install Bay / Car Security and Convenience / 2003 ram prostart install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

a_ndy_25

Member - Posts: 3

Joined: January 03, 2004

Location: Canada

Posted: January 03, 2004 at 6:59 PM / IP Logged

I just got a prostart CT-5000 for my 2003 Dodge Ram. I have been doing the research on the install and have determined that I need allot more than came in the box. I have all the diagrams and pics, but they do not list diode # Ect. Apparently my truck has a security system built in already. So here is my problem. Can anyone give me a list of parts that are required to do this installation? I live in a remote location and I don’t have access to many recourses. Where can I order this?

Resister sizes (1/4 watt?), Diode #, Relay, and this by-pass module for my truck.

Any help in this matter would be appreciated.

If it is not broke, make it better.

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: January 03, 2004 at 11:26 PM / IP Logged

hi the diagram is at this link as well as most of the info you need https://www.the12volt.com/installbay/forum_posts.asp?tid=22991&KW=dodge+ram

good luck

kirk

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 04, 2004 at 12:59 AM / IP Logged

Is your key grey? If so, a 555C from DEI will bypass the transponder key. If its black, you have nothing to worry about.

Do you have the factory alarm? A majority of the 02-04 Rams I have seen don't have it. Roll down window, lock truck with remote, wait 1 minute, reach in window and open door. If alarm sounds....you have it. Whether or not you have the alarm will determine resistor values needed.

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 04, 2004 at 1:00 AM / IP Logged

Another thing....anyone have a link to a Prostart install manual? I've seen that brand mentioned here a lot lately and would like to check them out.

Back to Top

a_ndy_25

Member - Posts: 3

Joined: January 03, 2004

Location: Canada

Posted: January 04, 2004 at 5:20 AM / IP Logged

thanks for the advice. here is their website: http://206.47.191.115/prostart.nsf/en/Prostart

i do have a grey key, power locks but no keyless entry and this is a 4 door truck so i don't know about a factory security system.

If it is not broke, make it better.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 ram prostart install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.