AutoLoc Power Locks, 1999 Sonoma

what part of the wiring is confusing?  is this a central locking system with 5 wire actuators and a relay box with pre-terminated harness?  or are they simply 2 wire actuators?  did it come with relays?  what else did the kit come with?

give us some details and we can help a bit more...

b

Its a 5 wire actuator and really I think I can probably figure out how to mount it, but the wiring is another thing....the problem with the wiring is that i don't know what to tap into from the truck, and which wires go to what?  

I hope this is the link you were wanting also I hope i did it right .. http://www.autoloc.com

the 5 wire locks have a feedback switch in them that causes a manually operated lock (unlocked with key or hand) to eletrically pop all other locks.  Did the kit not come with a pre-terminated harness and relay pack?  If not, wiring will be interesting to get the feedback working (never done feedback without the relay pack). 

However, if all you care about is locks working, you should find a green and blue lead on each lock motor.  These are lock/unlock triggers, working on a reversal rest at ground system.  Put ground on one lead and pulse +12V on the other and you'll see the motor work.  Reverse the leads (ground and pulse +12V on the opposites) and you'll see the motor work in reverse.

Simply run a pair of wires to the GREEN/ blue wires on each motor into the vehicle and trigger them with a reversal setup (2 relays)....can you be a bit more clear as to what you're not sure of?

b