98 cavalier bulb test wire

Home / the12volt's Install Bay / Car Security and Convenience / 98 cavalier bulb test wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

harvest honda

Member - Posts: 2

Joined: December 18, 2003

Location: Canada

Posted: January 10, 2004 at 1:19 PM / IP Logged

I need to know the wire color and location of the bulb test wire. Any help would be very appreciated.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 10, 2004 at 1:29 PM / IP Logged

not sure i know what your talking about...are you talking about the dome light???

Make: Chevrolet

Model: Cavalier

Year: 1998

This Database Was Last Updated On: 6/9/2003

Index #: 9268

Alarm

Constant 12 volts RED & RED IGNITION SWITCH HARNESS

Ignition 12 volts PINK IGNITION SWITCH HARNESS

Starter YELLOW IGNITION SWITCH HARNESS

Dome Light L GREEN/ BLACK (DR) & L BLUE (ALL DOORS) AT CONV. CENTER *

Trunk Pin Switch N/A

Parking Lamp BROWN (+) AT HEADLIGHT SWITCH

Power Lock L BLUE DRIVER KICK (W/O OEM KEYLESS) ** #203

Power Unlock WHITE PANEL (W/OEM KEYLESS) #202

* L GREEN/ BLACK (-) Covers Driver Door Only. L BLUE (-) Covers All Other Doors. Diode Isolation Needed, Cathode (Band) Side Of Diode Faces OEM Wires. Convenience Center Module Located Above Passenger Kick Panel. ** Without OEM Keyless Door Lock Wires MUST Be Tested From PASSENGER Switch!! W/O OEM Keyless See Note #203 Reversal Rest At Ground Door Lock Diagram. With OEM Keyless See Note #202 Positive Pulse Door Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

harvest honda

Member - Posts: 2

Joined: December 18, 2003

Location: Canada

Posted: January 10, 2004 at 1:40 PM / IP Logged

No, the vehicle bulb test wire required for the passlock 1 bypass.

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 10, 2004 at 4:57 PM / IP Logged

The bulb test wire in your car is the small black wire in one of the plugs going into your ignition switch. There are twoo small black wires in one plug and one in the other plug. This lone black wire is the bulb test wire. It will go to ground during crank.

sparky

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 10, 2004 at 5:49 PM / IP Logged

yeah I think it is in the same plug as the Red power wires if i remeber correctly.

J Rilla

Owner/Installer

Alpine Guy

Platinum - Posts: 2,478

Joined: October 18, 2003

Location: Canada

Posted: January 10, 2004 at 6:29 PM / IP Logged

yes, it is in the black 5 way connector....the one on the top. It has your constant power wire in that plug.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 cavalier bulb test wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.