the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

can i hook up more than one horn?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Yisitmehuh 
Member - Posts: 19
Member spacespace
Joined: December 18, 2003
Location: United States
Posted: January 17, 2004 at 11:57 AM / IP Logged  
i had an ungo ms 2007 and i tried to hook up a "mag siren", another horn, plus a piezo "pain" alarm in addition to the horn with the system and it worked for awhile. but then, it all stopped working.
i assume i messed something up
so im ordering a replacement one
my question is, how many horns can i hookup safely without killing my system
is there a certain way i should be hooking it up?
i just spliced into the existing horn wires to use the other 2 horns
thanks
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: January 17, 2004 at 12:37 PM / IP Logged  
If the unit no longers sounds anything what so ever. Even with one siren attached, then more than likely you have burnt out the alarms siren out put driver.
Most alarms siren output can sustain 2-5 amps continous. You should have added in a relay to increase the current capacity.
Assuming the unit is not dead, then wire a relay as follows below. Other wise, go and have it repaired.
87 = 12 volt fused constant
86 = Ground
85 = From alarm siren output
30 = To additional siren(s)
Regards
EVIL Teken . . .
bmf1000d 
Silver - Posts: 345
Silver spacespace
Joined: September 30, 2003
Location: United States
Posted: January 17, 2004 at 12:41 PM / IP Logged  

Yes you sure can all you have to do is wire relays for the second horn and siren.

"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
Yisitmehuh 
Member - Posts: 19
Member spacespace
Joined: December 18, 2003
Location: United States
Posted: January 17, 2004 at 2:07 PM / IP Logged  
sounds good, but uh
whats a wire relay?
bmf1000d 
Silver - Posts: 345
Silver spacespace
Joined: September 30, 2003
Location: United States
Posted: January 17, 2004 at 7:33 PM / IP Logged  

No Wire a relay this is a Relay. https://www.the12volt.com/relays/page1.asp#n2p

"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer