clifford intelistart remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / clifford intelistart remote start problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Scottb007

Member - Posts: 2

Joined: January 18, 2004

Location: United States

Posted: February 09, 2004 at 11:16 PM / IP Logged

I can't get the remote start to work with the clifford 700IQ when it is armed. It will start with the alarm turned off just fine. The remote start has a 18 guage brown / white wire which hooks to the IQ700 to a BROWN / white wire . This wire is called a alarm ignition sense wire. I think this is where the trouble is. I am installing this in a 1987 chevrolet full size truck. Any one seen this ?

Thanks,

Scott

Trav3D1

Copper - Posts: 146

Joined: April 06, 2003

Location: United States

Posted: February 10, 2004 at 9:39 AM / IP Logged

Hey Scott,

I have done this on several alarms as well by mistake, but it sounds like your starter wire for the remote start is on the incorrect side of the OEM starter wire. Try switching the sides and re-test.

Trav

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford intelistart remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.