the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 F150 Driver Door Priority


Post ReplyPost New Topic
< Prev Topic Next Topic >
Dolomite 
Member - Posts: 12
Member spacespace
Joined: December 01, 2003
Location: United States
Posted: February 18, 2004 at 11:11 AM / IP Logged  
Has anybody wired up the driver door priority in a new 04 F150?  I've got the doors to lock and unlock using the main lock/unlock triggers which are negative ground but the wiring diagram for this vehicle shows that the driver door priority uses a 5 wire reverse polarity to unlock the drivers door and I can't figure out how to get this to work.
daniel2002p 
Silver - Posts: 524
Silver spacespace
Joined: October 10, 2003
Location: United States
Posted: February 18, 2004 at 12:55 PM / IP Logged  
your alarm has to be capable of doing that in the first place.  what kind of alarm is it?
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
bmf1000d 
Silver - Posts: 345
Silver spacespace
Joined: September 30, 2003
Location: United States
Posted: February 18, 2004 at 1:27 PM / IP Logged  
You would have to wire a rest at ground relays for the drivers door and then the other for the regular locks.
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
Dolomite 
Member - Posts: 12
Member spacespace
Joined: December 01, 2003
Location: United States
Posted: February 18, 2004 at 5:11 PM / IP Logged  

Alarm is a Valet 554R.  This alarm has a programmable output for driver door priority.  The diagram I have only shows one wire for DD Priority but says it's a 5 wire reverse.

NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: February 18, 2004 at 5:55 PM / IP Logged  
The wire for the driver door motor is RED / orange in the driver kick. Wire it up like so:
2004 F150 Driver Door Priority -- posted image.
Be sure to test everything. Offhand the motor side should be the side going towards the driver door and the switch side will be going towards the rear of the vehicle. Good luck,
Mike
Dolomite 
Member - Posts: 12
Member spacespace
Joined: December 01, 2003
Location: United States
Posted: February 19, 2004 at 12:02 AM / IP Logged  
That worked.  Thanks for the help!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer