Wiring Help 3rd ignition and IPPME bypass

I am trying to install my autostart rs-850 system. I am confused on how to connect up the 3rd ignition wire. I have a 97 pontiac grand am. I have an IPPME bypass installed in the car from the system I am removing and replacing with the autostart. There is a brown wire from the IPPME that says to connect to (-) OUT WHEN RUNNING FROM CAR STARTER". there is a wire on the starter that says grounded out when armed and one that says grounded output when disarmed. Do I connect it to one of these wires? The other question I have is about the brown 3 ignition wire. The tech support I have been speakiing with says I need to use a relay to get it to work. I have a system installed now which i didn't install a relay. I am very confused now on what conections should be made for the main ignition connections. I included their reply below. Can anybody help clarify what exactly I need to do to finish this up. THANKS!!!

. I am a little confused on

> connecting the ignition 3 wire and what wire I should connect to > my GM Bypass IPPME module. There is a brown wire coming from the > bypass that needs to be connected to the autostart system. It is > labeled as "(-) OUT WHEN RUNNING FROM CAR STARTER" . Can you > explain the igniton 3rd wire? is this the brown wire at the > ignition? the remote start i bought has a seperate relay and wire > harness with it. Do I need to use it for this? If so can you tell > me which wire are connected to which? I am also not clear on what > you mean by light is + so connect to sw or go to the outside by > parking light? Can you clarify this for me? I assume that all my > other connections on my spreadsheet are correct? I currently have > a remote start system in the car I am taking out to replace it > with this one. It is the prostart 3300. I installed this one last > year. > > goautosound@optonline.net wrote:hi> your car has ignition 3 so you need to add a relay to make this work> use second ignition out to trigger third relay > and light is + so connect this by removing your sw or go to > outside by parking light> and if you are not doing window roll up > you do not need to connect window sws

According to the wiring diagram i pulled from 12 volt there is a brown ignition 3 wire. Is this incorrect?

thats the first time i have every seen a 3rd Ign on there....i have always just hook up the pink and white and it has worked for me"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

the brown is an accessory wire and isnt needed for RSKevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979