Matrix 3.5 ?

Home / the12volt's Install Bay / Car Security and Convenience / Matrix 3.5 ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

specialblendj

Copper - Posts: 118

Joined: September 03, 2003

Location: United States

Posted: March 08, 2004 at 2:36 PM / IP Logged

I installed a matrix 3.5 alarm, havent hooked up the remote start yet. Everytime I dissarm the alarm, the remote beeps 4 times, and the door and sensor icons flash, telling me that a door has been opened and the shock sensor has gone off, but they havent. It has always done this, and the door triggers and shock sensors function properly as far as setting the alarm off when a door is opened or the car is bumped.

JMaxx93

Copper - Posts: 73

Joined: December 02, 2003

Location: United States

Posted: March 08, 2004 at 3:06 PM / IP Logged

you must hook up the heavy gauge harness and the pink heavy gauge wire not being wired to ignition is the reason for all of your problems.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix 3.5 ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.