dei window module w/prox sensor

Home / the12volt's Install Bay / Car Security and Convenience / dei window module w/prox sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 10, 2004 at 3:03 PM / IP Logged

what would be the easiest way to make the prox sensor roll up the windows when the interior zone is set off?

if im not mistaken the dei piece needs a constant pulse (usually the armed output from alarm) to roll the windows up, so when using the prox sensor i will be working only with a negative pulse. so i will have to convert that pulse from the prox sensor into a constant pulse to feed into the window module, correct?

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Fullthrottle

Copper - Posts: 101

Joined: December 03, 2002

Location: United States

Posted: March 10, 2004 at 5:44 PM / IP Logged

Check this thread out:

https://www.the12volt.com/installbay/forum_posts.asp?tid=16131&KW=roll+up

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei window module w/prox sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.