How to disconnect after market alarm?

Home / the12volt's Install Bay / Car Security and Convenience / How to disconnect after market alarm? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sherry775

Member - Posts: 1

Joined: March 31, 2004

Location: United States

Posted: March 31, 2004 at 12:34 PM / IP Logged

Does anyone know how to disconnect an after market alarm? My alarm went off this morning when i had it turned off last night due to the remote no longer working. The remote has to be programmed to the alarm so i have to take the car into the stero place but until then i have no way of starting up my car with the alarm going off. i have a kill switch but its not working.

I disconnected the battery and as soon as i hook the positve back up it works again. Can i take out the fuse? if so, does any one know which fuse it is? I have a 98 Mit Eclipse with a Clifford alarm.

If anyone could help me i would love you.

Thank you

sherry

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: March 31, 2004 at 12:52 PM / IP Logged

lets see.....

check under the dash to see some unusual wiring taped up and follow them up to the brain and there should be at least one fuse, usually the blue one is the main power.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How to disconnect after market alarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.